Comments

• for the LAN this rule is working Source Original Source Translated Destination Original DestinationTranslated Service Original Service Translated Interface Inbound Interface Outbound Priority Firewalled Subnets Server Public Server Public Server Private Any Original Any Any 

  in Problem with ip spoof Comment by darkmen11 February 27
• Source Original Source Translated Destination Original DestinationTranslated Service Original Service Translated Interface Inbound Interface Outbound Priority Any Original Server Public Server Private Any Original Any Any For Nat traffic Statistics = 0 too

  in Problem with ip spoof Comment by darkmen11 February 27
• So please what's the problem ?

  in Problem with ip spoof Comment by darkmen11 February 27
• static for access rules = 0

  in Problem with ip spoof Comment by darkmen11 February 27
• Why do I have to delete static ARP? It allows me to have a second IP address on my interfacein the same subnet

  in Problem with ip spoof Comment by darkmen11 February 27
• and the in the packet monitor the packet arp was consumed

  in Problem with ip spoof Comment by darkmen11 February 27
• Hello, no, this is not a broadcast address" Locally, with a LAN connected to the firewall, I can ping the second address, but I cannot reach it via the internet; I get a 'dropped' message.

  in Problem with ip spoof Comment by darkmen11 February 27
• Yes X3 is my wan interface with 1 adress static and second address in arp table it's Static address I have no hits Thank you

  in Problem with ip spoof Comment by darkmen11 February 26
• It's the same subnet I just followed this tutorial but i have this issue Drop Code: 493 I add static entry i add NAT : Original Source: Any Translated Source: Original Original Destination: WAN2 Translated Destination: NEW SERVER Original Service: Any Translated Service: Original Inbound Interface: X3 Outbound Interface:…

  in Problem with ip spoof Comment by darkmen11 February 26